To produce arched profile panels from double standing seam profiles for use as dormers, round arches, domes, barrel-vault roofs, etc. for adjustable radii, starting from a radius of 300 mm, depending on material. Equipped with an infinitely variable speed controller for 0 - 12 m/min this may be used to produce a variety of radii. Separately powered bending units for upper and the lower folds. This may be used to control the operating speed.
Leading plates with 2 underfolds can be shaped in a single operation.
The infinitely variable width adjustment ranging from 300 - 800 mm is geared to match the manufacturing capabilities of the standing seam profiles produced by the Mini-
Prof, SPM 30/80, PMC and Quadro.
Possible shapes
The RBM may also be used for other profile heights of 25 - 40 mm by replacing pressure rollers.
Versions
RBM 32 for a profile height of 32 mm
RBM 25/32 for a profile height of 25 und 32 mm
RBM 25/38 for a profile height of 25 und 38 mm
RBM 32/38 for a profile height of 32 und 38 mm
Specifications
| Adjustment range | 300-810 mm (Axial dimensions) |
| Smallest radil | 300 mm (Non-ferrous metals) |
| 1500 mm (Sheet steel)(Stainless steel) | |
| Gauges | up to 0.8 mm (Non-ferrous metals) |
| up to 0.7 mm (Sheet steel) | |
| up to 0.5 mm (Stainless steel) | |
| Operating speed | 0-12 m/min (Infinitely adjustable) |
| Dimensions | 1,000 x 1,000 x 1700 mm (LxWxH ) |
| Weight | 230 kg |
| Drive | 2x0.55kW, 230V, 1-ph |