Swiveling cartridges each with 10 roller stations ensure rapid retooling times. The Quadro is equipped with a touch –panel controlled PLC and an electric cross cut shear to process given lengths and quantities automatically.
Very short retooling times by swiveling or replacing the exchangeable catridges.
Exchangeable cartridges with 10 roller stations may be swiveled
• Standing seam profiles with and without Clip-Relief profile heights of 25+32+38mm
• SNAP-folded profile with and without Clip-Relief profile heights of 25 and 38mm
• NAIL Strip system for profile heights of 25 and 38 mm NAIL
• U-profile with a turn-up height of up to 38mm
Exchangeable cartridges with 12 roller stations cannot be swiveled
• Sofit-Panel
• Stepped tile panel
• 44.5mm snap-profile
Exchangeable cartridges with 10 roller stations can not be swiveled
• 50 mm standing seam profile 50mm
• 50mm folded profile with Clip-Relief 50mm
| Strip run-in widths | from 300 to 800 mm |
| Gauges | 0.6-0.8 mm (Non-ferrous metals) |
| Sheet steel | 0.5-0.7 mm |
| Stainless steel | 0.4-0.5 mm |
| Dimensions | 3120x1720x1250mm，LxWxH |
| Infeed height | 900 mm |
| Weight | app. 1,260 kg |
| Feed rate | 14 m/min. |
| Drive | 2.2kw，400Volt，3-ph |
Available accessories
• Seam rolling system
• Set of header rollers for concave plates from 3m radius for 25mm standing seam profiles
• Slitting for locating panels
• Exchangeable cartridge with 10 or 12 roller stations for special profiles
• Decoiler AH 1250A1
• Decoiler AH 1250K5
Special profiles available at the clients request.